Thermal bridge-free installation in insulation materials.

Insulation fixing FID

The fischer insulation fixing FID is a plug for fixing light fixtures in plastered and non-plastered insulation panels made from polystyrene and polyurethane. The fischer FID is set by hand or using a cordless screwdriver. The special spiral thread taps itself in the insulating board. The fixtures - such as letterboxes, lamps, and motion detectors - can be secured with a 4.5 mm or 6 mm screw.

Product variants

Download of image data

Product variants

11 Product variant (s)

Anchor length

Wood and chipboard screws

Drive

Max. bolt penetration

Contents

Packaging

Viewed 11 of 11 variant (s)

Advantages

Since the anchor is set exclusively in the insulation itself, fixtures can be installed without thermal bridges.
The geometry of the FID allows for a simple installation in thin layers of plaster, without the need for pre-drilling, thus saving a stage of installation.
The FID 50 is used in thin insulating boards from 50mm. The FID 90 is used in thicker insulating boards, and can bear higher loads.
The bit mounting allows for setting with standard tools, thus allowing for a fast and economic installation.

Applications

To fix lightweight attachments on ETICS facades. The application areas are ETICS facades made of:

Polystyrene
Mineral wool
Soft wood fibre
Alternative ecological insulation boards

Building materials

Non-plastered, pressure-resistant insulating boards
Plastered, pressure-resistant insulating boards
ETICS insulating boards

You can find detailed information on building materials in the registration document.

Approvals

8C029

Functionality

The FID can be set in the insulating board with a cordless screwdriver or by hand.
For thick layers of plaster a pre-drilling (6 mm) is recommended.
The special spiral thread taps itself in the insulating board.
Water ingress in the insulation can be prevented by sealing the plug collar with a suitable sealant after successful pre-positioned installation.
We recommend to predrill an 6 mm hole in ETICs rendering.

Mounting Strip 1 Picture

1 / 4

1
2
3
4

Mounting Strip 2 Picture

1 / 4

1
2
3
4

System components

Hammer drill bit Quattric II S / Quattric II
83 variants

Anchor length ( l )	50 mm
Wood and chipboard screws ( d_s )	4.5 - 5.0 mm
Drive	TX40
Max. bolt penetration ( l_E,max )	35 mm
Contents	—
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209482131

Anchor length ( l )	50 mm
Wood and chipboard screws ( d_s )	4.5 - 5.0 mm
Drive	TX40
Max. bolt penetration ( l_E,max )	35 mm
Contents	4 x Insulation fixing FID 50 K
Packaging	Blister card
Amount	4 pcs.
GTIN (EAN-Code)	4048962059250

Anchor length ( l )	50 mm
Wood and chipboard screws ( d_s )	4.5 - 5.0 mm
Drive	TX40
Max. bolt penetration ( l_E,max )	35 mm
Contents	—
Packaging	—
Amount	10 pcs.
GTIN (EAN-Code)	4048962162349

Anchor length ( l )	50 mm
Wood and chipboard screws ( d_s )	4.5 - 5.0 mm
Drive	TX40
Max. bolt penetration ( l_E,max )	35 mm
Contents	45 x Insulation fixing FID Green 50
Packaging	—
Amount	45 pcs.
GTIN (EAN-Code)	4048962199758

Anchor length ( l )	50 mm
Wood and chipboard screws ( d_s )	4.5 - 5.0 mm
Drive	TX40
Max. bolt penetration ( l_E,max )	35 mm
Contents	4 x Insulation fixing FID Green 50 K
Packaging	Blister card
Amount	4 pcs.
GTIN (EAN-Code)	4048962218473

Insulation fixing FID

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download

Anchor length ( l )	90 mm
Wood and chipboard screws ( d_s )	6.0 mm
Drive	6 mm / 6-kt
Max. bolt penetration ( l_E,max )	80 mm
Contents	—
Packaging	—
Amount	25 pcs.
GTIN (EAN-Code)	4048962104684