fischer Highbond anchor FHB II-A S Inject M10 x 60/100 R

Top Features

For high loads in cracked concrete.
Economical in serial installation.
Low drill hole depth means less drilling effort.
No drill hole cleaning when using a hollow drill with extraction.
Suitable for pre-positioned and push-through installation.

The economical solution in cracked concrete.

Advantages

The Highbond system FHB II Inject achieves high load values in cracked concrete.
The combination of injection mortar FIS HB and anchor rod FHB II-AS Inject R (short version) is ideally suited for serial installation outdoors.
The low drill hole depth minimizes the drilling effort, which saves time and ensures economical installation.
When using hollow drills with extraction, no drill hole cleaning is required.

The Highbond anchor rod FHB II-AS R Inject is a system component of the fischer Highbond system FHB II Inject. The bonded anchor is ideal for standard fastenings in cracked concrete. With the FHB II AS Inject A4 for example guard rails and steel constructions are fixed outdoors. The conical anchor is set with the Highbond special mortar FIS HB.

Applications

Guard rails
Façades
Staircases
Steel constructions
Masts

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15

ETA-16/0637
ETA-21/0948
DoP No. 0281
DoP No. 0327
GS 3.2/16-352-1
(2103/12/12) - CM

Functionality

The FHB II-AS Inject is a bonded anchor with torque-controlled expansion for pre-positioned and push-trough installation.
The anchor rod is set with the Highbond special motor FIS HB and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled in the motar shell, which expands against the drill hole wall.

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 9

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	66 mm
Anchorage depth ( h_ef )	60 mm
Max. fixture thickness ( t _fix )	100 mm
Thread ( M )	M10
Width across nut	17 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962272956

pdf, 6.5 MBETA-16/0637

European Technical Assessment for fischer Highbond-Anchor FHB II Inject - Torque controlled bonded anchor for use in concrete

pdf, 6.7 MBDoP No. 0281

Declaration of Performance for fischer Highbond-Anchor FHB II Inject (Bonded expansion fastener for use in concrete)

pdf, 4.1 MBETA-21/0948

European Technical Assessment for fischer Highbond-Anchor FHB II for diamond drilling / extended working life

pdf, 4.2 MBDoP No. 0327

Declaration of Performance for fischer Highbond-Anchor FHB II for diamond drilling / extended working life (Bonded expansion fastener for use in concrete)